Rubber Kneader X(S)N-55L, Dispersion Kneader, Rubber Dispersion
Brief Introduction for Our Rubber Kneader (plastics)
It consists of a "w" shape body and two side boards made of high
quality steel plates by means of extrusion forming and welding,
which are jacked to take the flow of cooling water or steam. It is
plated with hard chrome on its internal walls.
Regular Note Pump
Timing injection pump to the sealing system on a regular injection
of hydraulic oil, lubrication sealing effect.
Thermal Resistance (or thermal couple)
There is a plug-in thermal resistance or thermal couple in middle
section of the bottom of the chamber to be connected to electrical
system to inspect and control the mixing temperature.
It is designed to the hollow blades of banbury type. The hollows
are connected with axial hole of rotor shaft used as cooling or
heating passage. The top edges and the side faces of blades are
surface welded with hard alloy and ground, then plated with hard
chrome and polished.
A common piping system is adopted for either cooling or heating
material in mixing operation. Through the system cooling water or
steam is fed in three ways to the cavities of the rotors blades, -
the jackets of the mixing chamber and the top ram.
It consists of a rotor with brake, cycloidal gear reducer, TP type
worm and worm gear, etc. It is able to actuate the mixing chamber
tilting by 140° Around the front rotors.
Dust Stop Device
At the joint between the top of mixing chamber and the cantilevered
arm of the machine frame, the dust sealing assembled with curved
slotted partings are used for obtaining an excellent and reliable
sealing purpose. The end face of the rotor is sealed by end contact
sealing with non oil-lubrication and it seals well and is
wear-resistance and durable.
Main Driving System
The part is made up with main motor, reducer, connecting gears. It
realizes odd-speed rotation of rotors with running face one other.
Pneumatic control system
Pneumatic control system is controlled by PLC order. A
bi-directional air cylinder makes the ram up or down. In case of
the over load occurs when mixing chamber, the top ram can be raised
automatically or manually if necessary, so as to protect motor from
Electrical Control System
Imported PLC device and electric control components which are all
imported products or imported technology products are adopted in
the electric control system as to raise control reliability.
Dust Sealing Device
Mixing chamber catchy interface rack cantilever the oil dust seals
and timing effect oiling dust, unique structure, the use of copper
materials, good sealing performance, no leakage of the glue, powder
leakage, do not pollute the environment, but also has easy
maintenance and long service life.